STIHL MS 880 R MAGNUM Instruction Manual Page 15
- Page / 124
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MS 880
English
13
When a kickback occurs, the guide bar
may rotate around the front handle. If the
cutting position is such that the
operator's left hand is gripping the front
handle behind the hand guard, and if the
left hand rotates around the front handle
and makes a sufficiently forceful contact
with the front hand guard, which is the
Quickstop activating lever, this contact
will activate a properly maintained
Quickstop chain brake. The chain brake
on newer STIHL chain saws can also be
activated by inertia. If the kickback
forces are sufficiently high, the hand
guard is accelerated towards the bar
nose even without hand contact. See the
chapter entitled "Chain Brake" of your
instruction manual.
Low kickback saw chain and reduced
kickback bars
STIHL offers a variety of bars and
chains. STIHL reduced kickback bars
and low kickback chains are designed to
reduce the risk of kickback injury. Other
chains are designed to obtain higher
cutting efficiency or sharpening ease but
may result in higher kickback tendency.
STIHL has developed a color code
system to help you identify the STIHL
reduced kickback bars and low kickback
chains. Cutting attachments with green
warning decals or green labels on the
packaging are designed to reduce the
risk of kickback injury. The matching of
green decaled powerheads under
3.8 cubic inches (62 cm³) displacement
with green labeled bars and green
labeled chains gives compliance with
the computed kickback angle
requirements of ANSI B 175.1-2000
001BA174 KN
Warning!
Never operate your chain saw without a
front hand guard. In a kickback situation
this guard helps protect your left hand
and other parts of your body. In addition,
removal of the hand guard on a saw
equipped with a Quickstop chain brake
will deactivate the chain brake.
Warning!
No Quickstop or other chain brake
device prevents kickback. These
devices are designed to reduce the risk
of kickback injury, if activated, in certain
kickback situations. In order for the
Quickstop to reduce the risk of kickback
injury, it must be properly maintained
and in good working order. See the
chapter of your instruction manual enti-
tled "Chain Brake" and the section
"Maintenance, Repair and Storing" at
the end of these Safety Precautions. In
addition, there must be enough distance
between the bar and the operator to
ensure that the Quickstop has sufficient
time to activate and stop the chain
before potential contact with the
operator.
Warning!
An improperly maintained chain brake
may increase the time needed to stop
the chain after activation, or may not
activate at all.
Warning!
Never run the chain saw above idle
speed for more than 3 seconds when
the chain brake is engaged or when the
chain is pinched or otherwise caught in
the cut. Clutch slippage can cause
excessive heat, leading to severe dam-
age of the motor housing, clutch and
oiler component and may interfere with
the operation of the chain brake. If
clutch slippage in excess of 3 seconds
has occurred, allow the motor housing
to cool before proceeding and check the
operation of your chain brake as
described in the chapter entitled "Chain
Brake" of your instruction manual. Also
make sure that the chain is not turning
at idle speed (see above at "Important
Adjustments").
- STIHL MS 880 1
- Instruction Manual 2
- Manual de 2
- 59 - 119 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions and 4
- Working Techniques 4
- 001BA087 LÄ 10
- 001BA082 KN 11
- 001BA093 LÄ 13
- 001BA174 KN 15
- 001BA037 KN 17
- 001BA038 KN 17
- 001BA088 LÄ 18
- 001BA146 KN 19
- 001BA153 KN 19
- 001BA143 KN 19
- 001BA150 KN 20
- 001BA144 KN 20
- 001BA145 KN 20
- 001BA147 KN 21
- 001BA148 KN 21
- 001BA033 KN 22
- 01BA051 LÄ 23
- Cutting Attachment 25
- Mounting the Bar and 25
- Tensioning the Chain 26
- Check Chain Tension 26
- 001BA159 KN 27
- 001BA160 KN 28
- 001BA161 KN 28
- 001BA162 KN001BA163 KN 28
- 165BA003 KN 28
- 001BA158 KN 29
- 143BA024 KN 30
- 143BA011 KN 30
- 143BA012 KN 30
- 171BA022 KN 31
- 171BA002 KN 31
- 171BA003 KN 32
- 143BA018 KN 33
- 143BA019 KN 33
- 143BA020 KN 33
- 133BA001 K 34
- Operating Instructions 35
- 001BA157 KN 36
- Taking Care of the Guide 37
- Air Filter System 37
- 137BA013 KN 38
- Adjusting the Carburetor 40
- Spark Arresting Screen in 41
- Spark Plug 41
- Replacing the Starter Rope 43
- Maintenance and Care 50
- Main Parts 52
- Specifications 54
- Federal Emission Control 56
- Warranty Statement 56
- Trademarks 58
- Contenido 61
- Acerca de este manual de 62
- Medidas de seguridad y 63
- 001BA115 KN 66
- 001BA113 KN 68
- 001BA114 KN 68
- 001BA031 KN 70
- 72
- 001BA040 KN 79
- Accesorio de corte 85
- Montaje de la espada y la 86
- 133BA024 KN 87
- 143BA007 KN 87
- Llenado de combustible 88
- Instrucciones para el uso 96
- Cuidado de la espada 98
- Sistema de filtro de aire 98
- 176BA005 KN 100
- 176BA006 KN 100
- 176BA007 KN 100
- 171BA019 KN 101
- 171BA020 KN 101
- Chispero en el silenciador 102
- 137BA008 KN 103
- 171BA024 KN 103
- 171BA018 KN 103
- Sustitución de la cuerda de 104
- 001BA006 K 105
- 001BA104 ST 106
- 171BA021 KN 106
- 001BA122 KN 107
- 689BA020 KN 108
- 689BA021 KN 108
- 689BA025 KN 108
- 689BA018 KN 109
- 689BA043 KN 109
- 689BA023 KN 109
- 689BA051 KN 110
- 689BA044 KN 110
- Componentes importantes 114
- Especificaciones 116
- Accesorios especiales 117
- Marcas comerciales 121
- ! WARNING! 124
- ! ADVERTENCIA! 124
Related products and manuals for Power chainsaws STIHL MS 880 R MAGNUM
(128 pages)© 2020, manymanuals.com. All rights reserved. | 1.424 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals