STIHL BGE 71 Instruction Manual download pdf (Page 12)

BGE 61, BGE 71

English

10

N Disconnect the plug from the power

supply.

Mounting the Blower Tube (BGE 61)

N Line up the recesses. The arrow (2)

must be on the top of the blower

tube (1).

N Push the blower tube (1) into the fan

housing stub (3) as far as the stop.

N Push the union nut (4) over the fan

housing stub (3) and turn it in the

direction of the arrow until the tab

(5) engages the opening (6) in the

union nut.

Mounting the Blower Tube (BGE 71)

Your BGE 71 can be switched on only

when the blower tube is properly

mounted. The union nut activates a

switch which closes the circuit to allow

the motor to be switched on.

N Line up the recesses. The arrow (2)

must be on the top of the blower

tube (1).

N Push the blower tube (1) into the fan

housing stub (3) as far as the stop.

N Push the union nut (4) over the fan

housing stub (3) and turn it in the

direction of the arrow as far as the

stop. You will hear the safety switch

being activated.

Mounting the Nozzle

N Push the nozzle (5) onto the blower

tube (1) as far as lug (6),

position (a) (long) or position (b)

(short), and rotate the nozzle in the

direction of the arrow to it lock in

position.

Removing the Blower Tube (BGE 61)

N Shut off the engine.

N Insert a suitable tool through the

opening in the union nut to press

down the tab.

N Rotate the union nut (4) in the

direction of the arrow as far as the

stop.

N Remove the blower tube (1).

Removing the Blower Tube (BGE 71)

N Shut off the engine.

N Rotate the union nut (4) in the

direction of the arrow as far as the

stop.

N Remove the blower tube (1).

Assembling the Blower

2

45

3

290BA021 KN

6

4

2

3

290BA003 KN

a

290BA004 KN

6

b

4

290BA022 KN

4

290BA005 KN

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comments to this Manuals

No comments