STIHL KM 94 R Instruction Manual download pdf (Page 21)

KM 94 R

English

19

To help prolong the wear life of the

starter rope, observe the following

points:

N Pull the starter rope only in the

direction specified.

N Do not pull the rope over the edge of

the guide bushing.

N Do not pull out the rope more than

specified.

N Do not allow the starter grip to snap

back, guide it back into the housing

slowly – see chapter on "Starting /

Stopping the Engine."

Have a damaged starter rope replaced

by your dealer before it breaks

completely. STIHL recommends that

you have servicing and repair work

carried out exclusively by an authorized

STIHL servicing dealer.

For periods of 3 months or longer

N Drain and clean the fuel tank in a

well ventilated area.

N Dispose of fuel properly in

accordance with local

environmental requirements.

N Run the engine until the carburetor

is dry – this helps prevent the

carburetor diaphragms sticking

together.

N Thoroughly clean the machine – pay

special attention to the air filter.

N Remove, clean and check the

attachment. Coat metal parts with

corrosion inhibiting oil.

N Store the machine in a dry and

secure location Keep out of the

reach of children and other

unauthorized persons.

Throttle Cable

Checking adjustment of throttle cable

Error: Engine speed increases when

only the throttle trigger is depressed.

N Start the engine.

N Depress the throttle trigger (1) – do

not press down the throttle trigger

lockout (2).

If the engine speed increases or if the

cutting attachment rotates, the throttle

cable has to be adjusted.

N Shut off the engine.

N Have throttle cable adjusted by your

dealer. STIHL recommends an

authorized STIHL servicing dealer.

Spark Arresting Screen in Muffler

If the engine is down on power, check

the spark arresting screen in the muffler.

N Wait for the muffler to cool down.

Rewind Starter Storing the Machine Inspection and Maintenance

by User

2

1191BA023 KN

1

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

Comments to this Manuals

No comments