STIHL Chainsaw MS 170 User Manual Page 15
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MS 170, MS 170 C, MS 180, MS 180 C
English
13
WARNING DANGER
MAINTENANCE, REPAIR AND
STORING
Maintenance, replacement, or repair of
the emission control devices and
systems may be performed by any
nonroad engine repair establishment or
individual. However, if you make a
warranty claim for a component which
has not been serviced or maintained
properly or if nonapproved replacement
parts were used, STIHL may deny
coverage.
WARNING
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non-STIHL parts may cause serious or
fatal injury.
Strictly follow the maintenance and
repair instructions in the appropriate
section of your instruction manual.
Please refer to the maintenance chart in
this manual.
WARNING
Always stop the engine and make sure
that the cutting tool is stopped before
doing any maintenance or repair work or
cleaning the power tool.
WARNING
Do not attempt any maintenance or
repair work not described in your
instruction manual. Have such work
performed by your STIHL servicing
dealer only. For example, if improper
tools are used to remove the flywheel or
if an improper tool is used to hold the
flywheel in order to remove the clutch,
structural damage to the flywheel could
occur and could subsequently cause the
flywheel to burst.
Wear gloves when handling or
performing maintenance on saw chains.
WARNING
Use the specified spark plug and make
sure it and the ignition lead are always
clean and in good condition. Always
press spark plug boot snugly onto spark
plug terminal of the proper size. (Note: If
terminal has detachable SAE adapter
nut, it must be securely attached.) A
loose connection between spark plug
terminal and the ignition wire connector
in the boot may create arcing that could
ignite combustible fumes and cause a
fire.
Some STIHL chain saws
are equipped with a cata-
lytic converter, which is
designed to reduce the
exhaust emissions of the
engine by a chemical
process in the muffler.
Due to this process, the
muffler does not cool
down as rapidly as con-
ventional mufflers when
the engine returns to idle
or is shut off. To reduce
the risk of fire and burn
injuries when using a cat-
alytic converter, always
set your chain saw down
in the upright position and
never locate it where the
muffler is near dry brush,
grass, wood chips or
other combustible materi-
als while it is still hot.
Do not rely on the chain
saw ’s insulation against
electric shock. To reduce
the risk of electrocution,
never operate this chain
saw in the vicinity of any
wires or cables (power,
etc.) which may be carry-
ing electric current.To
reduce risk of electrocu-
tion, take extra
precautions when cutting
near power lines. Have
the power switched off
before starting cutting
work in the immediate
vicinity of power lines.
- STIHL MS 170, 180 1
- Instruction Manual 2
- Manual de instrucciones 2
- 61 - 126 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions 5
- 001BA113 KN 10
- 001BA114 KN 10
- 001BA087 LÄ 11
- 001BA031 KN 12
- 001BA082 KN 12
- 15
- Reactive Forces 17
- 001BA174 KN 19
- 001BA037 KN 21
- 001BA038 KN 21
- Working Techniques 22
- 001BA088 LÄ 23
- 001BA040 KN 24
- 001BA146 KN 24
- 001BA153 KN 24
- 001BA143 KN 24
- 001BA150 KN 25
- 001BA144 KN 25
- 001BA145 KN 26
- 001BA147 KN 26
- 001BA148 KN 26
- Cutting Attachment 28
- Mounting the Bar and Chain 28
- (front chain tensioner) 28
- 143BA003 KN 29
- 135BA011 KN 31
- 143BA045 KN 31
- 001BA112 KN 32
- 143BA007 KN 32
- 143BA000 KN 33
- 143BA009 KN 34
- 001BA158 KN 34
- 143BA024 KN 35
- 143BA011 KN 35
- Operating Instructions 40
- Taking Care of the Guide Bar 41
- Cleaning the Air Filter 42
- Engine Management 42
- Adjusting the Carburetor 43
- Spark Arresting Screen in 43
- Spark Plug 44
- Maintenance and Care 50
- Main Parts 52
- Specifications 54
- Special Accessories 55
- Ordering Spare Parts 56
- STIHL Incorporated Federal 57
- Emission Control Warranty 57
- Statement 57
- STIHL Incorporated 59
- California Exhaust and 59
- Evaporative Emissions 59
- Control Warranty Statement 59
- Trademarks 61
- Contenido 63
- Acerca de este manual de 64
- Precauciones de seguridad 65
- 001BA258 KN 68
- 001BA234 KN 69
- 001BA238 KN 69
- 001BA239 KN 69
- Fuerzas reactivas 79
- Técnica de trabajo 85
- Accesorio de corte 91
- Montaje de la espada y 91
- 2310BA015 KN 93
- 2310BA016 KN 93
- 2310BA017 KN 93
- 001BA186 KN 93
- 181BA012 KN 93
- Arranque / parada del motor 100
- 143BA018 KN 101
- 143BA019 KN 101
- 143BA020 KN 102
- 143BA016 KN 102
- 143BA012 KN 103
- 143BA017 KN 103
- Instrucciones para el uso 104
- Cuidado de la espada 105
- Cubierta 106
- Limpieza del filtro de aire 106
- Gestión del motor 106
- Ajuste del carburador 107
- Chispero en el silenciador 107
- 000BA039 KN 108
- 143BA042 KN 110
- 001BA086 KN 110
- 689BA021 KN 111
- 689BA025 KN 111
- 689BA018 KN 112
- 689BA043 KN 112
- 689BA023 KN 112
- 689BA051 KN 113
- 689BA044 KN 113
- 689BA052 KN 113
- Componentes importantes 117
- Especificaciones 119
- 000BA073 KN 122
- Marcas comerciales 127
- Injection 128
- *04582078621B* 132
Related products and manuals for Power chainsaws STIHL Chainsaw MS 170
Power chainsaws STIHL HT 100 Instruction Manual
(104 pages)
(104 pages)
© 2020, manymanuals.com. All rights reserved. | 2.291 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals