STIHL Chainsaw MS 170 User Manual Page 21
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MS 170, MS 170 C, MS 180, MS 180 C
English
19
7. Cut only one log at a time.
8. Use extreme caution when
reentering a previous cut.
9. Do not attempt to plunge cut if you
are not experienced with these
cutting techniques.
10. Be alert for shifting of the log or
other forces that may cause the cut
to close and pinch the saw chain.
11. Maintain saw chain properly. Cut
with a correctly sharpened, properly
tensioned saw chain at all times.
12. Stand to the side of the cutting path
of the chain saw.
Bow Guides
WARNING
Do not mount a bow guide on any STIHL
chain saw. Any chain saw equipped with
a bow guide is potentially very
dangerous. The risk of kickback is
increased with a bow guide because of
the increased kickback contact area.
Low kickback saw chain will not
significantly reduce the risk of kickback
injury when used on a bow guide.
A=Pull-in
Pull-in occurs when the saw chain on the
bottom of the bar is suddenly stopped
when it is pinched, caught or encounters
a foreign object in the wood. The
reaction of the saw chain pulls the chain
saw forward and may cause the
operator to lose control.
Pull-in frequently occurs when the
bumper spike of the chain saw is not
held securely against the tree or limb
and when the saw chain is not rotating at
full speed before it contacts the wood.
WARNING
Use extreme caution when cutting small
size brush and saplings which may
easily catch the saw chain, be whipped
towards you or pull you off balance.
To avoid pull-in
1. Always start a cut with the saw
chain rotating at full speed and the
bumper spike in contact with the
wood.
2. The risk of pull-in may also be
reduced by using wedges to open
the kerf or cut.
B = Pushback
Pushback occurs when the saw chain on
the top of the bar is suddenly stopped
when it is pinched, caught or encounters
a foreign object in the wood. The
reaction of the saw chain may drive the
chain saw rapidly straight back toward
the operator and may cause loss of
chain saw control, which, in turn, may
cause serious or fatal injury. Pushback
frequently occurs when the top of the bar
is used for cutting.
To avoid pushback
1. Be alert to forces or situations that
may cause material to pinch the top
of the saw chain.
2. Do not cut more than one log at a
time.
3. Do not twist the chain saw when
withdrawing the bar from a plunge
cut or underbuck cut because the
saw chain can pinch.
001BA037 KN
A
001BA038 KN
B
- STIHL MS 170, 180 1
- Instruction Manual 2
- Manual de instrucciones 2
- 61 - 126 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions 5
- 001BA113 KN 10
- 001BA114 KN 10
- 001BA087 LÄ 11
- 001BA031 KN 12
- 001BA082 KN 12
- 15
- Reactive Forces 17
- 001BA174 KN 19
- 001BA037 KN 21
- 001BA038 KN 21
- Working Techniques 22
- 001BA088 LÄ 23
- 001BA040 KN 24
- 001BA146 KN 24
- 001BA153 KN 24
- 001BA143 KN 24
- 001BA150 KN 25
- 001BA144 KN 25
- 001BA145 KN 26
- 001BA147 KN 26
- 001BA148 KN 26
- Cutting Attachment 28
- Mounting the Bar and Chain 28
- (front chain tensioner) 28
- 143BA003 KN 29
- 135BA011 KN 31
- 143BA045 KN 31
- 001BA112 KN 32
- 143BA007 KN 32
- 143BA000 KN 33
- 143BA009 KN 34
- 001BA158 KN 34
- 143BA024 KN 35
- 143BA011 KN 35
- Operating Instructions 40
- Taking Care of the Guide Bar 41
- Cleaning the Air Filter 42
- Engine Management 42
- Adjusting the Carburetor 43
- Spark Arresting Screen in 43
- Spark Plug 44
- Maintenance and Care 50
- Main Parts 52
- Specifications 54
- Special Accessories 55
- Ordering Spare Parts 56
- STIHL Incorporated Federal 57
- Emission Control Warranty 57
- Statement 57
- STIHL Incorporated 59
- California Exhaust and 59
- Evaporative Emissions 59
- Control Warranty Statement 59
- Trademarks 61
- Contenido 63
- Acerca de este manual de 64
- Precauciones de seguridad 65
- 001BA258 KN 68
- 001BA234 KN 69
- 001BA238 KN 69
- 001BA239 KN 69
- Fuerzas reactivas 79
- Técnica de trabajo 85
- Accesorio de corte 91
- Montaje de la espada y 91
- 2310BA015 KN 93
- 2310BA016 KN 93
- 2310BA017 KN 93
- 001BA186 KN 93
- 181BA012 KN 93
- Arranque / parada del motor 100
- 143BA018 KN 101
- 143BA019 KN 101
- 143BA020 KN 102
- 143BA016 KN 102
- 143BA012 KN 103
- 143BA017 KN 103
- Instrucciones para el uso 104
- Cuidado de la espada 105
- Cubierta 106
- Limpieza del filtro de aire 106
- Gestión del motor 106
- Ajuste del carburador 107
- Chispero en el silenciador 107
- 000BA039 KN 108
- 143BA042 KN 110
- 001BA086 KN 110
- 689BA021 KN 111
- 689BA025 KN 111
- 689BA018 KN 112
- 689BA043 KN 112
- 689BA023 KN 112
- 689BA051 KN 113
- 689BA044 KN 113
- 689BA052 KN 113
- Componentes importantes 117
- Especificaciones 119
- 000BA073 KN 122
- Marcas comerciales 127
- Injection 128
- *04582078621B* 132
Related products and manuals for Power chainsaws STIHL Chainsaw MS 170
Power chainsaws STIHL HT 100 Instruction Manual
(104 pages)
(104 pages)
© 2020, manymanuals.com. All rights reserved. | 1.312 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals