STIHL Chainsaw MS 170 User Manual Page 40
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MS 170, MS 170 C, MS 180, MS 180 C
English
38
If the engine does not start
The master control lever was not
returned from the position cold start l
to warm start n in time, the engine may
be flooded.
N Move the master control lever to the
stop position 0
N Remove the spark plug – see
"Spark plug"
N Dry spark plug
N Crank the engine several times with
the starter – to clear the combustion
chamber
N Replace the spark plug – see "Spark
plug"
N Set the master control lever to warm
start n – even if the engine is cold
N Restart the engine
During the break-in period
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessarily high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
shortblock are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
During work
NOTICE
Do not make the mixture leaner to
achieve an apparent increase in power –
this could damage the engine – see
"Adjusting the Carburetor".
NOTICE
Open the throttle only when the chain
brake is off. Running the engine at high
revs with the chain brake engaged
(chain locked) will quickly damage the
shortblock and chain drive (clutch, chain
brake).
Check chain tension frequently
A new saw chain must be retensioned
more frequently than one that has been
in use already for an extended period.
Chain cold
Tension is correct when the chain fits
snugly against the underside of the bar
but can still be pulled along the bar by
hand. Retension if necessary – see
"Tensioning the Saw Chain".
Chain at operating temperature
The chain stretches and begins to sag.
The drive links must not come out of the
bar groove on the underside of the bar –
the chain may otherwise jump off the
bar. Retension the chain – see
"Tensioning the Saw Chain".
NOTICE
The chain contracts as it cools down. If it
is not slackened off, it can damage the
crankshaft and bearings.
After a long period of full-throttle
operation
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
carburetor) from thermal overload.
After finishing work
N Slacken off the chain if you have
retensioned it at operating
temperature during work.
Operating Instructions
- STIHL MS 170, 180 1
- Instruction Manual 2
- Manual de instrucciones 2
- 61 - 126 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions 5
- 001BA113 KN 10
- 001BA114 KN 10
- 001BA087 LÄ 11
- 001BA031 KN 12
- 001BA082 KN 12
- 15
- Reactive Forces 17
- 001BA174 KN 19
- 001BA037 KN 21
- 001BA038 KN 21
- Working Techniques 22
- 001BA088 LÄ 23
- 001BA040 KN 24
- 001BA146 KN 24
- 001BA153 KN 24
- 001BA143 KN 24
- 001BA150 KN 25
- 001BA144 KN 25
- 001BA145 KN 26
- 001BA147 KN 26
- 001BA148 KN 26
- Cutting Attachment 28
- Mounting the Bar and Chain 28
- (front chain tensioner) 28
- 143BA003 KN 29
- 135BA011 KN 31
- 143BA045 KN 31
- 001BA112 KN 32
- 143BA007 KN 32
- 143BA000 KN 33
- 143BA009 KN 34
- 001BA158 KN 34
- 143BA024 KN 35
- 143BA011 KN 35
- Operating Instructions 40
- Taking Care of the Guide Bar 41
- Cleaning the Air Filter 42
- Engine Management 42
- Adjusting the Carburetor 43
- Spark Arresting Screen in 43
- Spark Plug 44
- Maintenance and Care 50
- Main Parts 52
- Specifications 54
- Special Accessories 55
- Ordering Spare Parts 56
- STIHL Incorporated Federal 57
- Emission Control Warranty 57
- Statement 57
- STIHL Incorporated 59
- California Exhaust and 59
- Evaporative Emissions 59
- Control Warranty Statement 59
- Trademarks 61
- Contenido 63
- Acerca de este manual de 64
- Precauciones de seguridad 65
- 001BA258 KN 68
- 001BA234 KN 69
- 001BA238 KN 69
- 001BA239 KN 69
- Fuerzas reactivas 79
- Técnica de trabajo 85
- Accesorio de corte 91
- Montaje de la espada y 91
- 2310BA015 KN 93
- 2310BA016 KN 93
- 2310BA017 KN 93
- 001BA186 KN 93
- 181BA012 KN 93
- Arranque / parada del motor 100
- 143BA018 KN 101
- 143BA019 KN 101
- 143BA020 KN 102
- 143BA016 KN 102
- 143BA012 KN 103
- 143BA017 KN 103
- Instrucciones para el uso 104
- Cuidado de la espada 105
- Cubierta 106
- Limpieza del filtro de aire 106
- Gestión del motor 106
- Ajuste del carburador 107
- Chispero en el silenciador 107
- 000BA039 KN 108
- 143BA042 KN 110
- 001BA086 KN 110
- 689BA021 KN 111
- 689BA025 KN 111
- 689BA018 KN 112
- 689BA043 KN 112
- 689BA023 KN 112
- 689BA051 KN 113
- 689BA044 KN 113
- 689BA052 KN 113
- Componentes importantes 117
- Especificaciones 119
- 000BA073 KN 122
- Marcas comerciales 127
- Injection 128
- *04582078621B* 132
Related products and manuals for Power chainsaws STIHL Chainsaw MS 170
Power chainsaws STIHL HT 100 Instruction Manual
(104 pages)
(104 pages)
© 2020, manymanuals.com. All rights reserved. | 9.158 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals