STIHL HT 56 C-E Instruction Manual download pdf (Page 18)

HT 56 C

English

16

The unit features a split drive tube that

helps save space during transportation.

It unit can be easily disassembled for

transportation – see "Transporting the

Unit".

Connecting the Drive Tube

WARNING

Do not mount KombiTools – only use the

drive tube with splined shaft supplied

with the machine.

N Pull the cap (1) off the end of the

front drive tube and keep it in a safe

place for later use – see "Storing the

Machine".

N Put the powerhead on the ground so

that it rests on the machine support.

N Slide the lug (2) on the front drive

tube (3) into the slot (4) in the

coupling sleeve as far as stop – if

necessary, turn the front drive

tube (3) back and forth while

pushing it home.

When correctly installed, the red

line (5) (arrow point) must be flush with

the end of the coupling sleeve.

N Tighten down the star knob (6)

firmly.

N Attach the shoulder strap to the

carrying ring.

A cutting attachment consists of the saw

chain, guide bar and chain sprocket.

The cutting attachment that comes

standard is designed to exactly match

the pole pruner.

– The pitch (t) of the saw chain (1),

chain sprocket and the nose

sprocket of the Rollomatic guide bar

must match.

– The drive link gauge (2) of the saw

chain (1) must match the groove

width of the guide bar (3).

If non-matching components are used,

the cutting attachment may be damaged

beyond repair after a short period of

operation.

Assembling the Unit

4907BA004 KN

1

4907BA008 KN

2

4907BA009 KN

4

3

6

5

4907BA010 KN

Cutting Attachment

001BA248 KN

1

2

3

a

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Comments to this Manuals

No comments