STIHL HT 56 C-E Instruction Manual download pdf (Page 32)

HT 56 C

English

If there is a noticeable loss of engine

power

N Move the choke lever (1) to <.

N Turn the screw (2) in the filter

cover (3) counterclockwise until the

cover is loose.

N Ease the filter cover (3) over the

choke lever and lift it away.

N Clean away loose dirt from around

the filter.

N Reach into the recess (4) in the filter

housing and take out the felt

filter (5).

N Fit a new felt filter element (5). As a

temporary measure you can knock it

out on the palm of your hand or blow

it out with compressed air. Do not

wash.

NOTICE

Replace damaged parts.

N Fit the felt filter (5) in the filter

housing, make sure it is properly

seated – the arrow points to the

recess.

N Move the choke lever (1) to <.

N Fit the filter cover in position,

making sure the screw is square.

Tighten down the screw.

Exhaust emissions are controlled by the

design of the fundamental engine

parameters and components (e.g.

carburation, ignition, timing and valve or

port timing) without the addition of any

major hardware.

Cleaning the Air Filter

547BA022 KN

547BA023 KN

Engine Management

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

No comments

STIHL HT 56 C-E Instruction Manual Page 32