STIHL HT 56 C-E Instruction Manual download pdf (Page 28)

HT 56 C

English

26

Warm engine (warm start)

N Press in the choke lever (5) and turn

it to < at the same time.

Also use this setting if the engine has

been running but is still cold.

Cranking

N Remove the chain guard.

N Place the unit on the ground: It must

rest securely on the engine support

and the hook. If necessary, rest the

hook on a raised support (e.g. a

branch, mound or something

similar). Check that the chain is not

touching any object or the ground.

WARNING

Check that nobody is standing within the

working range of the pruner.

N Make sure you have a safe and

secure footing.

N Hold the unit firmly on the ground

with your left hand and press down

– do not touch the throttle trigger or

throttle trigger lockout.

NOTICE

Do not stand or kneel on the drive tube.

N Hold the starter grip with your right

hand.

N Pull the starter grip steadily.

NOTICE

Do not pull out the starter rope all the

way – it might otherwise break.

N Do not let the starter grip snap back.

Guide it slowly back into the housing

so that the starter rope can rewind

properly.

N Continue cranking until engine runs.

As soon as the engine runs

N Press down the throttle trigger

lockout and open the throttle – the

choke knob moves to the run

position F. After a cold start, warm

up the engine by opening the

throttle several times.

WARNING

Make sure the carburetor is correctly

adjusted. The saw chain must not move

when the engine is idling.

Your machine is now ready for

operation.

Shut off the engine.

N Move the stop switch in the direction

of 0 – the engine stops – release

the stop switch – it springs back to

the run position.

Other Hints on Starting

Engine stalls in cold start position g or

under acceleration

N Move the choke knob to < and

continue cranking until the engine

runs.

Engine does not start in warm start

position <

N Move the choke knob to g and

continue cranking until the engine

runs.

If the engine does not start

N Check that all settings are correct.

N Check that there is fuel in the tank

and refuel if necessary.

N Check that the spark plug boot is

properly connected.

N Repeat the starting procedure.

5

547BA017 KN

275BA007 KN

547BA021 KN

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 103 104

Comments to this Manuals

No comments